Select Page

4900 Series Commercial Air Separators

4900 Series Commercial Air Separators

Taco 4900 Series ® Commercial Air Separators help you save money and prolong the life of system pumps, piping and components by removing air and dirt from the system to prevent problems such as reduced heat transfer, loss of efficiency, pipe corrosion, pump damage, noise and the waste and cost of increased energy consumption. Patented PALL ring technology clears the system of micro-bubbles as small as 18 x 10 -6 meters, sand, dirt and rust.

Through the use of our Pall Ring design, the 4900 Series ® Commercial Air Separators uses coalescence to collect  and merge micro-bubbles on the surface of the pall rings and allow them to vent through the integral vent mechanism at the top of the vessel. The Pall Rings stop the momentum of dirt particles allowing them to fall to the bottom of the vessel and be blown down by the integral full port blow down valve. These are great for systems with both variable speed and constant flow requirements. Taco 4900 Series ® Commercial Air Separator feature test results from a 3rd party independent testing agency so you can be confident in the performance results of our 4900 models.

Taco 4900 Series ® Commercial Air Separator Tanks are designed, constructed and tested to ASME Section VIII, Div. 1 requirements. Computerized product selection helps you choose the Air or Air/Dirt Separator Tanks that is just the right fit for your application requirements. All fabrication is done in-house to assure a high level of quality.

Catalog
Instruction Sheet
Submittal Data
Performance Curves
Case Studies
Specifications
Test Reports
Introducing eLink® Connectivity

eLink® is Taco Comfort Solutions’ line of cloud services, providing users access to their devices data and performance while giving them control over their comfort. Using a Taco product featuring eLink provides users with support, monitoring, or controls straight from their mobile phone, tablet, or laptop. Now, it’s even easier to get important information, status updates and control of your Taco products. eLink provides the answer for both residential and commercial applications, just look for the logo to see if your product is connected.

Products featuring eLink are categorized into three application specific categories: Support, Monitoring, and Controls. These features of eLink identify how the cloud provides you with the support and control you require.

Learn More

LoadMatch® System

A LoadMatch® system is the marriage of two old ideas wrapped around a new technology. The old ideas are single pipe distribution and primary-secondary pumping. The new technology consists of the use of maintenance-free wet rotor circulators. The primary distribution system is a single pipe loop; the secondary distribution system is a decoupled secondary piping loop for each terminal unit in the system. The wet rotor circulator provides the specified flow to each terminal unit at all times. The simplicity of the Load-Match® concept allows you to specify one size of pipe for large portions of the system. In single loop installations, there is no limit to the number of coils you can install. Final pipe size is determined by the total load of the loop and ∆T. If your loop is heavily loaded, it’s practical to split the system into two loops with smaller pipe sizes. This change saves installation costs, energy, and money, and can reduce pump head, and lower hp. When loops are carrying equal loads and arranged symmetrically, they will nearly self-balance. The resulting configuration will keep balancing losses down and will lower ongoing energy costs.

Learn More

Find your Taco Sales Representative
Click below to get in touch with your local Taco supplier:
Find a Rep
We’re Here to Help
Support is only a click away! Our dedicated customer service and tech support teams are waiting to hear from you.
Support
Performance Data

GPM: Up to 33,457
Connection Sizes: 2-36″
Sizes: 10″ dia. x 20″ height – 84″ dia. x 239″ height
Working Pressure: 125,150PSI Standard (Optional 175, 250, 300PSI, Higher Pressures Optional)
Max. Operating Temp.: 240°F (Optional Higher Temperatures Available)

Features
  • Designed, constructed and tested to ASME Section VIII, Div. 1 requirements
  • Integral SS Pall Ring basket
  • Furnished with Air Vent (dirt and air/dirt models furnished with full port blow down valve)
  • Available with removable cover
  • 2 PSI or less pressure drop at flow rates shown on submittal
  • Higher max. pressures available
  • All fabrication done in house
  • Computerized selections to ensure fast and easy design
  • National Board Registration
  • CRN registration (optional)
Applications
  • LoadMatch® Systems
  • Hot Water Heating Systems
  • Closed Cooling Circuits
  • Air Conditioning Systems
  • Hydronic Heating & Cooling
  • Water/Glycol concentrations up to 50%
  • Solar / Geothermal
Models & Related Documents

Pin It on Pinterest