fbpx
Select Page

LoadMatch Twin-Tee Fittings

LoadMatch Twin-Tee Fittings

LoadMatch Twin-Tee Fittings

Patented Technology For Assured Comfort and Performance of LoadMatch Systems

Taco LoadMatch ® Twin-Tee ® Fittings assure the comfort and performance of LoadMatch ® single pipe hydronic systems and primary secondary two-pipe hydronic systems, while reducing the number and cost of fittings and field joints required in the system.

The patented Taco LoadMatch ® Twin-Tee ® is designed to replace the two primary circuit tees used to connect a secondary piping circuit to a primary piping circuit in a hydronic system. It also ensures that the secondary piping circuit is decoupled, so that the flow in the secondary circuit is zero, when the secondary pump is off and the primary pump is on. This also ensures that the flows in other circuits are not affected by the operation of the secondary circuit pump. In addition, an internal baffle between the secondary circuit supply and return connection prevents any short circuiting of secondary fluid from the return to supply connections.

Catalog
Submittal Data
Warranties
LoadMatch® System

A LoadMatch® system is the marriage of two old ideas wrapped around a new technology. The old ideas are single pipe distribution and primary-secondary pumping. The new technology consists of the use of maintenance-free wet rotor circulators. The primary distribution system is a single pipe loop; the secondary distribution system is a decoupled secondary piping loop for each terminal unit in the system. The wet rotor circulator provides the specified flow to each terminal unit at all times. The simplicity of the Load-Match® concept allows you to specify one size of pipe for large portions of the system. In single loop installations, there is no limit to the number of coils you can install. Final pipe size is determined by the total load of the loop and ∆T. If your loop is heavily loaded, it’s practical to split the system into two loops with smaller pipe sizes. This change saves installation costs, energy, and money, and can reduce pump head, and lower hp. When loops are carrying equal loads and arranged symmetrically, they will nearly self-balance. The resulting configuration will keep balancing losses down and will lower ongoing energy costs.

Learn More

Find your Taco Sales Representative
Click below to get in touch with your local Taco supplier:
Find a Rep
We’re Here to Help
Support is only a click away! Our dedicated customer service and tech support teams are waiting to hear from you.
Support
Performance Data
Not Applicable
Features
  • Ensures Decoupled Secondary Piping Circuit
  • Internal Baffle Prevents Short Circuiting of Secondary Fluid
  • Saves on Installation and Maintenance Costs
  • Multiple Connection Types: Sweat, Threaded, Grooved
Applications
  • Single Piple LoadMatch® Systems
  • Horizontal Distribution
  • Vertical Distribution
  • Reverse Flow Systems
  • Two Pipe Systems—Primary Secondary Connections
WordPress Lightbox

Pin It on Pinterest