Select Page

00 Series Variable Speed Outdoor Reset Circulator

00 Series Variable Speed Outdoor Reset Circulator

00 Series Variable Speed Outdoor Reset Circulator

The 00 ® Series Variable Speed Outdoor Reset Circulator controls the hot water supply temperature, so that the heat supplied to the building equals the heat loss of the building. It modulates the circulator to inject hot water from the boiler loop into the radiant or reduced temperature loop while providing outdoor reset to a heating system. Available in any style 006 – 0014, the 00 ® Series Variable Speed Outdoor Reset Circulator also comes with a boiler sensor to protect against low return temperatures. The 00 ® Series Variable Speed Outdoor Reset Circulator is the ultimate for protection, control, ease of installation, and trouble-free operation.

Catalog    
Instruction Sheet    
Submittal Data    
Find your Taco Sales Representative
Click below to get in touch with your local Taco supplier:
Find a Rep
We’re Here to Help
Support is only a click away! Our dedicated customer service and tech support teams are waiting to hear from you.
Support
Performance Data

Flow Range: 0-52 GPM
Head Range (ft): 0-35″
HP: 1/40 – 1/6
Min. Fluid Temp.: 40°F (4°C)
Max. Fluid Temp.: 230°F (110°C)
Max. Working Pressure: 125 PSI, 150 PSI
Connection Sizes: ¾”, 1″, 1 ¼”, 1 ½” Flanged, ¾” Bronze Sweat, ¾” NPT Stainless Steel

Features
  • 00® Reliability
  • Available in sizes 006 – 0014
  • All-in-One Pump/Control
  • Sensors Included
  • Easy to Wire
  • UL Approved
  • Snap-in PC Board
  • Fuse Protected
  • Plug-in Low-Voltage Terminal
  • Optional Integral Flow Check (IFC®)
    • Simplifies Piping
    • Prevents Gravity Flow/Reverse Flow
    • Eliminates Separate In-Line Flow Check
    • Reduces Installed Cost
    • Improves System Performance
  • Adjustable Heating Curve (0.2 – 2.2)
  • Selectable Max. Supply Temp. (110°F, 130°F, 150°F or Off)
  • Selectable Min. Boiler Return Temp. (85°F or Off, Default to Heating Curve)
  • System and/or Boiler Pump Contact (Line Voltage 5 amp or Off)
  • LED Status Panel
  • Pump Exercise
  • Post Purge
  • Fail Safe Mode
  • 2-Second Start Delay to Prevent Short Cycling
Applications
  • Hot Water Heating Systems
  • Closed Cooling Circuits
  • Hydronic Heating & Cooling
  • Radiant Heating Systems

Pin It on Pinterest