00 Series Variable Speed Setpoint 00 Circulator   

The versatile Setpoint version of the Variable Speed “00” can be set up to deliver a fixed temperature, maintain a specific temperature drop between sensor locations (DT), used as a bypass/shunt pump, or integrated into a fan coil package to vary the speed of the pump based on supply air temperature.

Features:

  • Adjustable Setpoint (30° - 210°F)
  • Adjustable Temperature Difference (DT) (5° - 50°F)
  • Boiler Protection (135°F)
  • Boiler Protection as a Limit Control (75° - 165°F)
  • LED Status Panel
  • Direct or Reverse Acting
  • Selectable Output Response Speed
  • Linear or Logarithmic Output
  • Pump Exercise (10 Seconds After 3 Days of No Operation)
Features
00® Reliability
Available in sizes 003 - 0014
All-in-One Pump/Control
Sensors Included
Easy to Wire
UL Approved
Snap-in PC Board
Fuse Protected
Plug-in Low-Voltage Terminal
Optional Integral Flow Check (IFC®)
Simplifies Piping
Prevents Gravity Flow/Reverse Flow
Eliminates Separate In-Line Flow Check
Reduces Installed Cost
Improves System Performance
Adjustable Setpoint (30° - 210°F)
Adjustable Temperature Difference (Delta-T) (5° - 50°F)
Boiler Protection (135°F)
Boiler Protection as a Limit Control (75° - 165°F)
LED Status Panel
Direct or Reverse Acting
Selectable Output Response Speed
Linear or Logarithmic Output
Pump Exercise (10 Seconds After 3 Days of No Operation)
00® Series
Variable Speed Setpoint
• GPM: 0-52
• Head (ft): 0-35
• HP: 1/2 -25
• Sizes (in): 1-1/4